Vibration friction welding machine is mainly used in the form of vibration welding processing and production, more suitable for thermoplastic materials, as well as semi-crystalline resin, amorphous resin such as PVC, PC. Vibratory friction welding machine can be joined to auto parts, aviation parts, home appliances and so on. Suitable for almost all thermoplastic plastic welding, reciprocating motion with the direction of the workpiece allows the movement of non-binding parts, medium or large parts. Vibration friction welding machine in the automotive application of the most important reflected in the engine air intake system, interior and exterior trim and lights.
Vibratory friction welding machine with the use of materials and ultrasonic welding machine material is relatively similar. The amorphous material is more suitable for our vibration friction welding. Our machinery is mainly used, ring vibration or linear vibration welding.
At present, are basically used are PA plus glass fiber reinforced materials, and in terms of the current process is only able to meet the vibration friction welding requirements, whether it is from the airtight, burst pressure intensity in terms of other connections are not Achieved. In terms of headlights, most of them used hot plate welding. In recent years, many manufacturers started to switch to vibration friction welding machine, mainly due to vibration friction welding less flash material (the appearance of the lamp is particularly important), welding cycle Short, greatly improving the production efficiency, strength can meet the requirements.